Translate

Senin, 22 Juli 2013

LoadBalance FreeBSD

By Unknown   Posted at  23.48   BSD No comments

Banyak ISP dewasa ini menggunakan lebih dari satu koneksi untuk layanan akses internet mereka. Oleh sebab itulah diperlukan sebuah router yang dapat berperan dalam menggabungkan bandwith yang didapat guna kelancaran koneksi internet yang diterima oleh client mereka.  Salah satunya adalah teknik Load Balance yang akan dibahas dalam tulisan kali ini, penulis menggunakan FreeBSD dalam aplikasi tersebut.

Berikut script untuk koneksi Load Balance dengan menggunakan 2 ISP.

lan_net = “192.168.0.0/24″
int_if  = “dc0″
ext_if1 = “fxp0″
ext_if2 = “fxp1″
ext_gw1 = “68.146.224.1″
ext_gw2 = “142.59.76.1″
#  nat outgoing connections on each internet interface
nat on $ext_if1 from $lan_net to any -> ($ext_if1)
nat on $ext_if2 from $lan_net to any -> ($ext_if2)
#  default deny
block in  from any to any
block out from any to any
#  pass all outgoing packets on internal interface
pass out on $int_if from any to $lan_net
#  pass in quick any packets destined for the gateway itself
pass in quick on $int_if from $lan_net to $int_if
#  load balance outgoing tcp traffic from internal network.
pass in on $int_if route-to \
{ ($ext_if1 $ext_gw1), ($ext_if2 $ext_gw2) } round-robin \
proto tcp from $lan_net to any flags S/SA modulate state
#  load balance outgoing udp and icmp traffic from internal network
pass in on $int_if route-to \
{ ($ext_if1 $ext_gw1), ($ext_if2 $ext_gw2) } round-robin \
proto { udp, icmp } from $lan_net to any keep state
#  general “pass out” rules for external interfaces
pass out on $ext_if1 proto tcp from any to any flags S/SA modulate state
pass out on $ext_if1 proto { udp, icmp } from any to any keep state
pass out on $ext_if2 proto tcp from any to any flags S/SA modulate state
pass out on $ext_if2 proto { udp, icmp } from any to any keep state
#  route packets from any IPs on $ext_if1 to $ext_gw1 and the same for
#  $ext_if2 and $ext_gw2
pass out on $ext_if1 route-to ($ext_if2 $ext_gw2) from $ext_if2 to any
pass out on $ext_if2 route-to ($ext_if1 $ext_gw1) from $ext_if1 to any

Demikain semoga bermanfaat. Terima kasih

About the Author

Nulla sagittis convallis arcu. Sed sed nunc. Curabitur consequat. Quisque metus enim, venenatis fermentum, mollis in, porta et, nibh. Duis vulputate elit in elit. Mauris dictum libero id justo.
View all posts by: BT9

0 komentar:

Back to top ↑
Connect with Us

© 2013 Coretan | Anak | Negeri . WP Mythemeshop Converted by Bloggertheme9
Blogger templates. Proudly Powered by Blogger.